A solar inverter with computerised controller, a mounting system, and solar panels (modules) make up solar systems. DC power is generated by solar panels using sunlight. The generated electricity is then converted into AC by the inverter so that it may be used in the home. The solar system is managed and optimised by the computerised controller. A battery is necessary if you want an off-grid solar system or a battery backup system.
The roof is the most typical place for solar PV panel installation. The majority of roofs often meet the installation requirements needed to give panels the most sunlight. The solar panels could potentially be put on the ground if roof installation is not feasible or desired. You just need to make sure that nothing is in the way of the sun.
1. Construct a scaffold:
To ensure safety when performing the installation while on the roof, you must first create scaffolding.
2. Install solar panel mounting systems:
The solar panel mounting system must then be installed. The solar panels’ foundation will be supported by this. To receive the most sunlight, the entire mounting structure must be inclined at an angle of 18 to 36 degrees.
3. Setup Solar Panels:
The solar panel itself needs to be mounted on the mounting framework after the mounts are set up. You ensure that it remains stable, make sure to tighten all the bolts and nuts.
4. Install Solar Panel Wiring:
The installation of the electrical wire is the following stage of the installation process. MC4 connectors are typically utilised since they are appropriate for all types of solar panels. Make sure to turn off the home’s energy supply while installing the wiring.
5. Put in a solar inverter:
The solar inverter must then be linked to the system after that. Usually situated close to the main panel, it may be either indoors or outside. If kept in a colder environment, inverters operate more effectively.
If the inverter is outside, it needs to be protected from the midday sun. If it is installed indoors, the garage or utility room are typically the best locations because they have airflow and stays cool for the majority of the year.
6. Solar Battery and Inverter Bond:
The solar battery must then be linked to the solar inverter. You won’t have to worry about running out of useful energy during cloudy days thanks to the solar battery storage, which can also help cut installation costs for solar battery storage systems.
7. To the consumer unit, connect the inverter:
To produce energy, the inverter needs to be linked to the consumer unit. To track the exact amount of electricity the solar panels generate, a generation meter must also be connected. You can assess the performance of your solar system using a computer or other gadget. For instance, you may determine the best time to use your washing machine or other utilities by looking at how much electricity you produce at various times.
8. Start and Test Solar Panels:
The final step is to switch the power on and test the installed solar panel system. And after this, the solar panel installation process is completed and it is ready to use.
Maintanance of solar Panel:
You can simply wash the face of the panels with a regular garden hose for general cleaning. Doing this in the morning or evening is recommended. Additionally, stay away from showering them with cold water while they are still hot as this could harm them.
Additionally, if the panels require additional cleaning that the hose cannot do, then you can scrape them with a sponge and soapy water. Another option is to hire a cleaning service. This is suggested if the panels need more thorough cleaning or are too high.
In every 4-6 years, you should have an installer inspect your system. Asking your installer about the specific upkeep needs for your solar system is also a smart idea.
Look no further if you want to go a step further and purchase solar panels for your house. To compare up to 4 offers from local vendors, Just call. The service offered by Chaitanyasri GreenTech is without any conditions.
Leave a reply